Allow to send video stream to the NewTek NDI (Network Device Interface) broadcast standard.
Go check Video Output DeviceVideo Output Device are device allowing to send video stream out of SmodeRead More to see how to configure the device.
Note that you can download and install the NewTek NDI SDK from here https://www.newtek.com/ndi/sdk/
This will allow to run the "NDI Video Monitor" application to check if this signal is correctly sent.
(do not forget to activate the Smode output)
If you got the error
texture can't be updated
try to set the colorSpace to one of the available format ( this is due to the sender broadcasting one format and then sending another, so it need to be manually set )
Whether you see this problem in your devices
or this one in your video outputs;
it means that you have to add the requested number of IO Channel
Remove watermark on inputs and outputs channels
Read More to your device.
Color Space (NDI Color Space) : Color space of the ndi output. It can be RGBA BGRA or YUV422 for compressed colorspace.
Note that UYVA and 4:2:0 formats (YV12 NV12 I420) are not yet supported.
Note that interlaced output format are not yet available.
Group (Text) : set a ndi group for your output to be in (you will need set it in the Ndi access manager to allow app to receive the group on the other machine