camera tracking data latency needs a specific XR/AR license. If you'd like to try out these features to decide whether you want to purchase an XR/AR license, please 
contact us.
                    
                      Here we are looking at the VFX output of Smode with On Air enabled
                    
                    If when the camera rotates the extension mask detach from the camera video input
                    In the first case the tracking data are faster like this:
 
                    
                    You need to add delay to the 
                    Link To Tracker
                    Placement relative to tracker
                    Read More
                     of the camera to re-sync the video with the Tracking Data
 
                    
                    In the second case the tracking data are slower like this:
 
                    
                    Here you first need to check with the people who set up the tracking system, if they do not have added any delay ( if yes they need to remove it )
                    
                      You should never use negative number and / or Placement smoothing for tracker camera
                    
if you can not find any way to make the tracking data faster you will need to add delay to your Video input
                    but be careful with this because the delay you added to your video input will need to be added to the delay of the back and front in the VFX processor
 
                    
                    After adjusting the delay and latency you will have this result
