NDI Output

Video Output Device - Send video output into NDI

Enables sending a video stream to the NewTek NDI (Network Device Interface) broadcast standard. Please check the Video Output Device Video Output Devices are devices that enable the sending of a video stream out of Smode Read More section to learn how to configure the device.
You can download and install the NewTek NDI SDK from here: https://www.newtek.com/ndi/sdk/. This will enable you to run the 'NDI Video Monitor' application to check if the signal is correctly sent (don't forget to Enable Output Enable/Disable Video Outputs Read More ).
If you encounter an error stating 'texture can't be updated' try setting the color space to one of the available formats. This issue may arise when the sender broadcasts in one format and then sends in another, requiring manual adjustment.

Remove watermark

If you see this sign on your Output:
then, you need to add the required number of IO Channels Remove the watermark on Inputs and Outputs channels Read More to your device.

Parameters

  • Color Space (NDI Color Space) : Color space of the ndi output. It can be RGBA BGRA or YUV422 for compressed colorspace. Note that UYVA and 4:2:0 formats (YV12 NV12 I420) are not yet supported. Note that interlaced output formats are not yet available.
  • Group (Text) : Sets an NDI group for your output (you will need to set it in the NDI Access Manager to allow the app to receive the group on the other machine).

See Also: